Frigate: bump to v0.18.2

install/apache-tomcat-install.sh

@@ -13,14 +13,12 @@ setting_up_container
 network_check
 update_os
 
-version="${var_apache_tomcat_version:-}"
-[[ -n "$version" ]] || read -r -p "${TAB3}Which Tomcat version would you like to install? (9, 10.1, 11): " version || true
-jdk_version="${var_apache_tomcat_jdk_version:-}"
+read -r -p "${TAB3}Which Tomcat version would you like to install? (9, 10.1, 11): " version
 case $version in
 9)
   TOMCAT_VERSION="9"
   echo "Which LTS Java version would you like to use? (8, 11, 17, 21): "
-  [[ -n "$jdk_version" ]] || read -r jdk_version || true
+  read -r jdk_version
   case $jdk_version in
   8 | 11 | 17 | 21)
     JAVA_VERSION="$jdk_version" setup_java
@@ -34,7 +32,7 @@ case $version in
 10 | 10.1)
   TOMCAT_VERSION="10"
   echo "Which LTS Java version would you like to use? (11, 17, 21): "
-  [[ -n "$jdk_version" ]] || read -r jdk_version || true
+  read -r jdk_version
   case $jdk_version in
   11 | 17 | 21)
     JAVA_VERSION="$jdk_version" setup_java
@@ -48,7 +46,7 @@ case $version in
 11)
   TOMCAT_VERSION="11"
   echo "Which LTS Java version would you like to use? (17, 21): "
-  [[ -n "$jdk_version" ]] || read -r jdk_version || true
+  read -r jdk_version
   case $jdk_version in
   17 | 21)
     JAVA_VERSION="$jdk_version" setup_java

install/aria2-install.sh

@@ -18,7 +18,7 @@ $STD apt install -y aria2
 msg_ok "Installed Aria2"
 
 prompt="${var_aria2_ariang:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add AriaNG? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add AriaNG? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   msg_info "Installing Dependencies"
   $STD apt install -y nginx

install/asterisk-install.sh

@@ -47,8 +47,7 @@ Choose Asterisk version to install:
 2) Latest LTS ($LTS_VERSION)
 3) Latest Certified ($CERT_VERSION)
 EOF
-ASTERISK_CHOICE="${var_asterisk_version:-}"
-[[ -n "$ASTERISK_CHOICE" ]] || read -rp "Enter choice [1-3]: " ASTERISK_CHOICE || true
+read -rp "Enter choice [1-3]: " ASTERISK_CHOICE
 
 CERTIFIED=0
 case "$ASTERISK_CHOICE" in

install/authelia-install.sh

@@ -17,10 +17,9 @@ fetch_and_deploy_gh_release "authelia" "authelia/authelia" "binary"
 
 MAX_ATTEMPTS=3
 attempt=0
-DOMAIN="${var_authelia_domain:-}"
 while true; do
   attempt=$((attempt + 1))
-  [[ -n "$DOMAIN" ]] || read -rp "${TAB3}Enter your domain or IP (ex. example.com or 192.168.1.100): " DOMAIN || true
+  read -rp "${TAB3}Enter your domain or IP (ex. example.com or 192.168.1.100): " DOMAIN
   if [[ -z "$DOMAIN" ]]; then
     if ((attempt >= MAX_ATTEMPTS)); then
       DOMAIN="${LOCAL_IP:-localhost}"
@@ -41,13 +40,11 @@ while true; do
       break
     else
       msg_warn "Invalid IP address!"
-      DOMAIN=""
     fi
   elif [[ "$DOMAIN" =~ ^[a-zA-Z0-9]([a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?(\.[a-zA-Z0-9]([a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?)*\.[a-zA-Z]{2,}$ ]]; then
     break
   else
     msg_warn "Invalid domain format!"
-    DOMAIN=""
   fi
 done
 msg_info "Setting Authelia up"

install/bichon-install.sh

@@ -15,8 +15,7 @@ update_os
 
 fetch_and_deploy_gh_release "bichon" "rustmailer/bichon" "prebuild" "latest" "/opt/bichon" "bichon-*-$(arch_resolve "x86_64" "aarch64")-unknown-linux-gnu.tar.gz"
 
-bichon_url="${var_bichon_url:-}"
-[[ -n "$bichon_url" ]] || read -r -p "${TAB3}Enter the public URL for Bichon (e.g., https://bichon.yourdomain.com) or leave empty to use container IP: " bichon_url || true
+read -r -p "${TAB3}Enter the public URL for Bichon (e.g., https://bichon.yourdomain.com) or leave empty to use container IP: " bichon_url
 if [[ -z "$bichon_url" ]]; then
   msg_info "No URL provided"
   BICHON_PUBLIC_URL="http://$LOCAL_IP:15630"

install/bitmagnet-install.sh

@@ -34,8 +34,7 @@ setup_deb_based() {
   chmod +x bitmagnet
   msg_ok "Configured bitmagnet"
 
-  tmdbapikey="${var_bitmagnet_tmdb_api_key:-}"
-  [[ -n "$tmdbapikey" ]] || read -r -p "${TAB3}Enter your TMDB API key if you have one: " tmdbapikey || true
+  read -r -p "${TAB3}Enter your TMDB API key if you have one: " tmdbapikey
 
   cat <<EOF >/etc/bitmagnet.env
 POSTGRES_HOST=localhost
@@ -100,8 +99,7 @@ setup_alpine() {
   $STD su - postgres -c "psql -c 'CREATE DATABASE bitmagnet;'"
   msg_ok "Built bitmagnet"
 
-  tmdbapikey="${var_bitmagnet_tmdb_api_key:-}"
-  [[ -n "$tmdbapikey" ]] || read -rp "${TAB3}Enter your TMDB API key if you have one: " tmdbapikey || true
+  read -rp "${TAB3}Enter your TMDB API key if you have one: " tmdbapikey
 
   msg_info "Enabling bitmagnet Service"
   cat <<EOF >/etc/init.d/bitmagnet

install/bytestash-install.sh

@@ -25,7 +25,7 @@ $STD npm install
 msg_ok "Installed ByteStash"
 
 allowreg="${var_bytestash_registration:-}"
-[[ -n "$allowreg" ]] || read -rp "${TAB3}Do you want to allow registration of multiple accounts? [y/n]: " allowreg || true
+[[ -n "$allowreg" ]] || read -rp "${TAB3}Do you want to allow registration of multiple accounts? [y/n]: " allowreg
 
 msg_info "Creating Service"
 cat <<EOF >/etc/systemd/system/bytestash-backend.service

install/caddy-install.sh

@@ -18,7 +18,7 @@ setup_deb_based() {
   systemctl enable -q --now caddy
 
   prompt="${var_caddy_xcaddy:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install xCaddy Addon? <y/N> " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install xCaddy Addon? <y/N> " prompt
   if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
     setup_go
     fetch_and_deploy_gh_release "xcaddy" "caddyserver/xcaddy" "binary"
@@ -64,7 +64,7 @@ EOF
   msg_ok "Installed Caddy"
 
   prompt="${var_caddy_xcaddy:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install xCaddy Addon? <y/N> " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install xCaddy Addon? <y/N> " prompt
   if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
     GO_VERSION="$(curl -fsSL https://go.dev/VERSION?m=text | head -1 | cut -c3-)" setup_go
     fetch_and_deploy_gh_release "xcaddy" "caddyserver/xcaddy" "prebuild" "latest" "/opt/xcaddy" "xcaddy_*_linux_$(arch_resolve).tar.gz"

install/cloudflare-ddns-install.sh

@@ -13,18 +13,15 @@ setting_up_container
 network_check
 update_os
 
-var_cf_api_token="${var_cf_api_token:-}"
-[[ -n "$var_cf_api_token" ]] || read -rp "${TAB3}Enter the Cloudflare API token: " var_cf_api_token || true
-[[ -n "$var_cf_api_token" ]] || { msg_error "No Cloudflare API token given; set var_cf_api_token or answer the prompt"; exit 64; }
+var_cf_api_token="default"
+read -rp "${TAB3}Enter the Cloudflare API token: " var_cf_api_token
 
-var_cf_domains="${var_cf_domains:-}"
-[[ -n "$var_cf_domains" ]] || read -rp "${TAB3}Enter the domains separated with a comma (*.example.org,www.example.org) " var_cf_domains || true
-[[ -n "$var_cf_domains" ]] || { msg_error "No domains given; set var_cf_domains or answer the prompt"; exit 64; }
+var_cf_domains="default"
+read -rp "${TAB3}Enter the domains separated with a comma (*.example.org,www.example.org) " var_cf_domains
 
 var_cf_proxied="false"
-answer="${var_cloudflare_ddns_proxied:-}"
 while true; do
-  [[ -n "$answer" ]] || read -rp "${TAB3}Proxied? (y/n): " answer || answer="n"
+  read -rp "${TAB3}Proxied? (y/n): " answer
   case "$answer" in
   [Yy]*)
     var_cf_proxied="true"
@@ -34,13 +31,12 @@ while true; do
     var_cf_proxied="false"
     break
     ;;
-  *) echo "Please answer y or n."; answer="" ;;
+  *) echo "Please answer y or n." ;;
   esac
 done
 var_cf_ip6_provider="none"
-answer="${var_cloudflare_ddns_ipv6:-}"
 while true; do
-  [[ -n "$answer" ]] || read -rp "${TAB3}Enable IPv6 support? (y/n): " answer || answer="n"
+  read -rp "${TAB3}Enable IPv6 support? (y/n): " answer
   case "$answer" in
   [Yy]*)
     var_cf_ip6_provider="cloudflare.trace"
@@ -50,7 +46,7 @@ while true; do
     var_cf_ip6_provider="none"
     break
     ;;
-  *) echo "Please answer y or n."; answer="" ;;
+  *) echo "Please answer y or n." ;;
   esac
 done
 msg_ok "Configured Application"

install/cockpit-install.sh

@@ -33,7 +33,7 @@ msg_ok "Installed Cockpit"
 # 45Drives only publishes amd64 packages
 if [[ "$(arch_resolve)" != "arm64" ]]; then
   prompt="${var_cockpit_45drives:-}"
-  [[ -n "$prompt" ]] || read -r -p "Would you like to install 45Drives' cockpit-file-sharing, cockpit-identities, and cockpit-navigator  <y/N> " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "Would you like to install 45Drives' cockpit-file-sharing, cockpit-identities, and cockpit-navigator  <y/N> " prompt
 fi
 if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
   msg_info "Installing 45Drives' cockpit extensions"

install/comfyui-install.sh

@@ -17,8 +17,7 @@ setup_hwaccel
 echo
 echo "${TAB3}Choose the GPU type for ComfyUI:"
 echo "${TAB3}[1]-None  [2]-NVIDIA  [3]-AMD  [4]-Intel"
-gpu_choice="${var_comfyui_gpu_type:-}"
-[[ -n "$gpu_choice" ]] || read -rp "${TAB3}Enter your choice [1-4] (default: 1): " gpu_choice || true
+read -rp "${TAB3}Enter your choice [1-4] (default: 1): " gpu_choice
 gpu_choice=${gpu_choice:-1}
 case "$gpu_choice" in
 1) comfyui_gpu_type="none" ;;

install/cryptpad-install.sh

@@ -20,7 +20,7 @@ msg_ok "Installed Dependencies"
 NODE_VERSION="22" setup_nodejs
 
 onlyoffice="${var_cryptpad_onlyoffice:-}"
-[[ -n "$onlyoffice" ]] || read -rp "${TAB3}Install OnlyOffice components instead of CKEditor? (Y/N): " onlyoffice || true
+[[ -n "$onlyoffice" ]] || read -rp "${TAB3}Install OnlyOffice components instead of CKEditor? (Y/N): " onlyoffice
 fetch_and_deploy_gh_release "cryptpad" "cryptpad/cryptpad" "tarball"
 
 msg_info "Setup CryptPad"

install/docker-install.sh

@@ -15,8 +15,11 @@ update_os
 
 setup_deb_based() {
   setup_docker
-  socket_choice="${var_docker_socket:-}"
-  [[ -n "$socket_choice" ]] || read -r -p "${TAB3}Expose Docker TCP socket (insecure) ? [n = No, l = Local only (127.0.0.1), a = All interfaces (0.0.0.0)] <n/l/a>: " socket_choice || true
+  if [[ -n "${var_docker_socket:-}" ]]; then
+    socket_choice="$var_docker_socket"
+  else
+    read -r -p "${TAB3}Expose Docker TCP socket (insecure) ? [n = No, l = Local only (127.0.0.1), a = All interfaces (0.0.0.0)] <n/l/a>: " socket_choice
+  fi
   case "${socket_choice,,}" in
   l | local)
     socket="tcp://127.0.0.1:2375"
@@ -67,8 +70,11 @@ setup_alpine() {
   msg_ok "Installed Docker"
 
   DOCKER_COMPOSE_LATEST_VERSION=$(get_latest_github_release "docker/compose" false)
-  prompt="${var_docker_compose:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Docker Compose? <y/N> " prompt || true
+  if [[ -n "${var_docker_compose:-}" ]]; then
+    prompt="$var_docker_compose"
+  else
+    read -r -p "${TAB3}Would you like to add Docker Compose? <y/N> " prompt
+  fi
   if [[ "${prompt,,}" =~ ^(y|yes|true)$ ]]; then
     msg_info "Installing Docker Compose $DOCKER_COMPOSE_LATEST_VERSION"
     DOCKER_CONFIG=${DOCKER_CONFIG:-$HOME/.docker}
@@ -77,8 +83,11 @@ setup_alpine() {
     chmod +x "$DOCKER_CONFIG"/cli-plugins/docker-compose
     msg_ok "Installed Docker Compose $DOCKER_COMPOSE_LATEST_VERSION"
   fi
-  prompt="${var_docker_socket:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to expose the Docker TCP socket? <y/N> " prompt || true
+  if [[ -n "${var_docker_socket:-}" ]]; then
+    prompt="$var_docker_socket"
+  else
+    read -r -p "${TAB3}Would you like to expose the Docker TCP socket? <y/N> " prompt
+  fi
   case "${prompt,,}" in
   y | yes | a | all) socket="tcp://0.0.0.0:2375" ;;
   l | local) socket="tcp://127.0.0.1:2375" ;;

install/dotnetaspwebapi-install.sh

@@ -26,9 +26,8 @@ $STD apt install -y \
   nginx
 msg_ok "Installed Dependencies"
 
-var_project_name="${var_project_name:-}"
-[[ -n "$var_project_name" ]] || read -r -p "${TAB3}Type the assembly name of the project: " var_project_name || true
-[[ -n "$var_project_name" ]] || { msg_error "No assembly name given; set var_project_name or answer the prompt"; exit 64; }
+var_project_name="default"
+read -r -p "${TAB3}Type the assembly name of the project: " var_project_name
 
 msg_info "Setting up FTP Server"
 useradd ftpuser

install/elementsynapse-install.sh

@@ -23,9 +23,7 @@ NODE_VERSION="22" NODE_MODULE="yarn" setup_nodejs
 
 echo "${TAB3}It is important to choose the name for your server before you install Synapse, because it cannot be changed later."
 echo "${TAB3}The server name determines the “domain” part of user-ids for users on your server: these will all be of the format @user:my.domain.name. It also determines how other matrix servers will reach yours for federation."
-servername="${var_elementsynapse_server_name:-}"
-[[ -n "$servername" ]] || read -r -p "${TAB3}Please enter the name for your server: " servername || true
-[[ -n "$servername" ]] || { msg_error "No server name given; set var_elementsynapse_server_name or answer the prompt"; exit 64; }
+read -p "${TAB3}Please enter the name for your server: " servername
 
 msg_info "Installing Element Synapse"
 setup_deb822_repo "matrix-org" \

install/emqx-install.sh

@@ -39,7 +39,7 @@ echo "$LATEST_VERSION" >~/.emqx
 msg_ok "Installed EMQX"
 
 prompt="${var_emqx_disable_mq:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to disable the EMQX MQ feature? (reduces disk/CPU usage) <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to disable the EMQX MQ feature? (reduces disk/CPU usage) <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   msg_info "Disabling EMQX MQ feature"
   mkdir -p /etc/emqx

install/fileflows-install.sh

@@ -45,8 +45,7 @@ $STD ln -svf /usr/bin/ffmpeg /usr/local/bin/ffmpeg
 $STD ln -svf /usr/bin/ffprobe /usr/local/bin/ffprobe
 $STD rm -rf /opt/fileflows/Server/runtimes/win-*
 
-install_server="${var_fileflows_mode:-}"
-[[ -n "$install_server" ]] || read -r -p "${TAB3}Do you want to install FileFlows Server or Agent? (S/A): " install_server || true
+read -r -p "${TAB3}Do you want to install FileFlows Server or Agent? (S/A): " install_server
 
 if [[ "$install_server" =~ ^[Ss]$ ]]; then
   msg_info "Installing FileFlows Server"
@@ -55,10 +54,9 @@ if [[ "$install_server" =~ ^[Ss]$ ]]; then
   systemctl enable -q --now fileflows
   msg_ok "Installed FileFlows Server"
 else
-  server_url="${var_fileflows_server_url:-}"
-  [[ -n "$server_url" ]] || read -r -p "${TAB3}Enter FileFlows Server URL (e.g. http://192.168.1.10:19200): " server_url || true
+  read -r -p "${TAB3}Enter FileFlows Server URL (e.g. http://192.168.1.10:19200): " server_url
   while [[ -z "${server_url// /}" ]]; do
-    read -r -p "${TAB3}Enter FileFlows Server URL (e.g. http://192.168.1.10:19200): " server_url || { msg_error "No FileFlows Server URL given; set var_fileflows_server_url or answer the prompt"; exit 64; }
+    read -r -p "${TAB3}Enter FileFlows Server URL (e.g. http://192.168.1.10:19200): " server_url
   done
   msg_info "Installing FileFlows Agent"
   cd /opt/fileflows/Agent

install/forgejo-runner-install.sh

@@ -15,12 +15,12 @@ update_os
 setup_yq
 
 if [[ -z "${var_forgejo_instance:-}" ]]; then
-  read -r -p "${TAB3}Forgejo Instance URL (e.g. https://codeberg.org): " var_forgejo_instance || true
+  read -r -p "${TAB3}Forgejo Instance URL (e.g. https://codeberg.org): " var_forgejo_instance
   var_forgejo_instance="${var_forgejo_instance:-https://codeberg.org}"
 fi
 
 if [[ -z "${var_forgejo_runner_uuid:-}" ]]; then
-  read -r -p "${TAB3}Forgejo Runner UUID: " var_forgejo_runner_uuid || true
+  read -r -p "${TAB3}Forgejo Runner UUID: " var_forgejo_runner_uuid
 fi
 
 if [[ -z "${var_forgejo_runner_uuid:-}" ]]; then
@@ -29,7 +29,7 @@ if [[ -z "${var_forgejo_runner_uuid:-}" ]]; then
 fi
 
 if [[ -z "${var_forgejo_runner_token:-}" ]]; then
-  read -r -p "${TAB3}Forgejo Runner Token: " var_forgejo_runner_token || true
+  read -r -p "${TAB3}Forgejo Runner Token: " var_forgejo_runner_token
 fi
 
 if [[ -z "${var_forgejo_runner_token:-}" ]]; then
@@ -39,7 +39,7 @@ fi
 
 DEFAULT_RUNNER_LABELS="linux-amd64:docker://node:22-bookworm"
 if [[ -z "${var_runner_labels:-}" ]]; then
-  read -r -p "${TAB3}Additional runner labels (comma-separated, or leave blank for default only): " var_runner_labels || true
+  read -r -p "${TAB3}Additional runner labels (comma-separated, or leave blank for default only): " var_runner_labels
 fi
 if [[ -n "${var_runner_labels:-}" ]]; then
   RUNNER_LABELS="${DEFAULT_RUNNER_LABELS},${var_runner_labels}"

install/frigate-install.sh

@@ -110,7 +110,7 @@ export AUTOGRAPH_VERBOSITY=0
 export GLOG_minloglevel=3
 export GLOG_logtostderr=0
 
-fetch_and_deploy_gh_release "frigate" "blakeblackshear/frigate" "tarball" "v0.18.0" "/opt/frigate"
+fetch_and_deploy_gh_release "frigate" "blakeblackshear/frigate" "tarball" "v0.18.2" "/opt/frigate"
 
 msg_info "Building Nginx"
 $STD bash /opt/frigate/docker/main/build_nginx.sh

install/ghostfolio-install.sh

@@ -51,10 +51,8 @@ echo -e ""
 msg_custom "🪙" "$YW" "CoinGecko API keys are optional but provide better cryptocurrency data."
 msg_custom "🪙" "$YW" "You can skip this and add them later by editing /opt/ghostfolio/.env"
 echo -e ""
-COINGECKO_DEMO_KEY="${var_ghostfolio_coingecko_demo_key:-}"
-[[ -n "$COINGECKO_DEMO_KEY" ]] || read -rp "${TAB3}CoinGecko Demo API key (press Enter to skip): " COINGECKO_DEMO_KEY || true
-COINGECKO_PRO_KEY="${var_ghostfolio_coingecko_pro_key:-}"
-[[ -n "$COINGECKO_PRO_KEY" ]] || read -rp "${TAB3}CoinGecko Pro API key (press Enter to skip): " COINGECKO_PRO_KEY || true
+read -rp "${TAB3}CoinGecko Demo API key (press Enter to skip): " COINGECKO_DEMO_KEY
+read -rp "${TAB3}CoinGecko Pro API key (press Enter to skip): " COINGECKO_PRO_KEY
 
 msg_info "Setting up Environment"
 cat <<EOF >/opt/ghostfolio/.env

install/headscale-install.sh

@@ -16,7 +16,7 @@ update_os
 fetch_and_deploy_gh_release "headscale" "juanfont/headscale" "binary"
 
 prompt="${var_headscale_admin:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add headscale-admin UI? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add headscale-admin UI? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   fetch_and_deploy_gh_release "headscale-admin" "GoodiesHQ/headscale-admin" "prebuild" "latest" "/opt/headscale-admin" "admin.zip"
 

install/influxdb-install.sh

@@ -21,8 +21,7 @@ setup_deb822_repo \
   "stable"
 msg_ok "Set up InfluxDB Repository"
 
-prompt="${var_influxdb_version:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Which version of InfluxDB to install? (1, 2 or 3) " prompt || true
+read -r -p "${TAB3}Which version of InfluxDB to install? (1, 2 or 3) " prompt
 if [[ $prompt == "3" ]]; then
   INFLUX="3"
 elif [[ $prompt == "2" ]]; then
@@ -52,7 +51,7 @@ fi
 msg_ok "Installed InfluxDB"
 
 prompt="${var_influxdb_telegraf:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Telegraf? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Telegraf? <y/N> " prompt
 if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
   msg_info "Installing Telegraf"
   $STD apt install -y telegraf

install/kometa-install.sh

@@ -28,15 +28,9 @@ mkdir -p config/assets
 cp config/config.yml.template config/config.yml
 msg_ok "Setup Kometa"
 
-TMDBKEY="${var_kometa_tmdb_key:-}"
-[[ -n "$TMDBKEY" ]] || read -r -p "${TAB3}Enter your TMDb API key: " TMDBKEY || true
-[[ -n "$TMDBKEY" ]] || { msg_error "No TMDb API key given; set var_kometa_tmdb_key or answer the prompt"; exit 64; }
-PLEXURL="${var_kometa_plex_url:-}"
-[[ -n "$PLEXURL" ]] || read -r -p "${TAB3}Enter your Plex URL: " PLEXURL || true
-[[ -n "$PLEXURL" ]] || { msg_error "No Plex URL given; set var_kometa_plex_url or answer the prompt"; exit 64; }
-PLEXTOKEN="${var_kometa_plex_token:-}"
-[[ -n "$PLEXTOKEN" ]] || read -r -p "${TAB3}Enter your Plex token: " PLEXTOKEN || true
-[[ -n "$PLEXTOKEN" ]] || { msg_error "No Plex token given; set var_kometa_plex_token or answer the prompt"; exit 64; }
+read -r -p "${TAB3}Enter your TMDb API key: " TMDBKEY
+read -r -p "${TAB3}Enter your Plex URL: " PLEXURL
+read -r -p "${TAB3}Enter your Plex token: " PLEXTOKEN
 sed -i '/^plex:/,/^[^ ]/{s|  url:.*|  url: '"$PLEXURL"'|}' /opt/kometa/config/config.yml
 sed -i '/^plex:/,/^[^ ]/{s|  token:.*|  token: '"$PLEXTOKEN"'|}' /opt/kometa/config/config.yml
 sed -i '/^tmdb:/,/^[^ ]/{s|  apikey:.*|  apikey: '"$TMDBKEY"'|}' /opt/kometa/config/config.yml

install/kutt-install.sh

@@ -15,8 +15,7 @@ update_os
 
 echo "${TAB3}How would you like to handle SSL termination?"
 echo "${TAB3}[i]-Internal (self-signed SSL Certificate)   [e]-External (use your own reverse proxy)"
-ssl_choice="${var_kutt_ssl:-}"
-[[ -n "$ssl_choice" ]] || read -rp "${TAB3}Enter your choice <i/e> (default: i): " ssl_choice || true
+read -rp "${TAB3}Enter your choice <i/e> (default: i): " ssl_choice
 ssl_choice=${ssl_choice:-i}
 case "${ssl_choice,,}" in
 i)
@@ -33,9 +32,7 @@ EOF
   msg_ok "Configured Caddy"
   ;;
 e)
-  custom_host="${var_kutt_hostname:-}"
-  [[ -n "$custom_host" ]] || read -r -p "${TAB3}Enter the hostname you want to use for Kutt (eg. kutt.example.com): " custom_host || true
-  [[ -n "$custom_host" ]] || { msg_error "No hostname given; set var_kutt_hostname or answer the prompt"; exit 64; }
+  read -r -p "${TAB3}Enter the hostname you want to use for Kutt (eg. kutt.example.com): " custom_host
   if [[ "$custom_host" ]]; then
     DEFAULT_HOST="$custom_host"
   fi

install/languagetool-install.sh

@@ -29,12 +29,12 @@ rm -f /tmp/LanguageTool-stable.zip
 msg_ok "Setup LanguageTool"
 
 ngram_dir=""
-lang_code="${var_languagetool_ngram_lang:-}"
+lang_code=""
 max_attempts=3
 attempt=0
 
 while [[ $attempt -lt $max_attempts ]]; do
-  [[ -n "$lang_code" ]] || read -r -p "${TAB3}Enter language code (en, de, es, fr, nl) to download ngrams or press ENTER to skip: " lang_code || lang_code=""
+  read -r -p "${TAB3}Enter language code (en, de, es, fr, nl) to download ngrams or press ENTER to skip: " lang_code
 
   if [[ -z "$lang_code" ]]; then
     break
@@ -43,11 +43,11 @@ while [[ $attempt -lt $max_attempts ]]; do
   if [[ "$lang_code" =~ [[:space:]] ]]; then
     ((attempt++))
     remaining=$((max_attempts - attempt))
-    lang_code=""
     if [[ $remaining -gt 0 ]]; then
       msg_error "Please enter only ONE language code. You have $remaining attempt(s) remaining."
     else
       msg_error "Maximum attempts reached. Continuing without ngrams."
+      lang_code=""
     fi
     continue
   fi

install/linkwarden-install.sh

@@ -25,7 +25,7 @@ RUST_CRATES="monolith" setup_rust
 PG_DB_NAME="linkwardendb" PG_DB_USER="linkwarden" setup_postgresql_db
 
 prompt="${var_linkwarden_adminer:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Adminer? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Adminer? <y/N> " prompt
 if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
   setup_adminer
 fi

install/mariadb-install.sh

@@ -22,7 +22,7 @@ setup_deb_based() {
   msg_ok "Setup MariaDB"
 
   prompt="${var_mariadb_phpmyadmin:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add PhpMyAdmin? <y/N> " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add PhpMyAdmin? <y/N> " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
     msg_info "Installing phpMyAdmin"
     $STD apt install -y \
@@ -60,7 +60,7 @@ setup_alpine() {
   msg_ok "MariaDB Configured"
 
   prompt="${var_mariadb_adminer:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install Adminer with lighttpd? <y/N>: " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install Adminer with lighttpd? <y/N>: " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
     msg_info "Installing Adminer and dependencies"
     $STD apk add --no-cache \

install/mediamanager-install.sh

@@ -13,9 +13,7 @@ setting_up_container
 network_check
 update_os
 
-admin_email="${var_mediamanager_admin_email:-}"
-[[ -n "$admin_email" ]] || read -r -p "${TAB3}Enter the email address of your first admin user: " admin_email || true
-[[ -n "$admin_email" ]] || { msg_error "No admin e-mail given; set var_mediamanager_admin_email or answer the prompt"; exit 64; }
+read -r -p "${TAB3}Enter the email address of your first admin user: " admin_email
 if [[ "$admin_email" ]]; then
   EMAIL="$admin_email"
 fi

install/meilisearch-install.sh

@@ -16,7 +16,7 @@ update_os
 MEILISEARCH_BIND="0.0.0.0:7700" setup_meilisearch
 
 prompt="${var_meilisearch_ui:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Do you want add meilisearch-ui? [y/n]: " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Do you want add meilisearch-ui? [y/n]: " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   NODE_VERSION="22" NODE_MODULE="pnpm@latest" setup_nodejs
   fetch_and_deploy_gh_release "meilisearch-ui" "riccox/meilisearch-ui" "tarball"

install/mongodb-install.sh

@@ -16,9 +16,8 @@ update_os
 if [[ "$(arch_resolve)" == "arm64" ]]; then
   MONGO_VERSION="8.0" setup_mongodb
 else
-  install_mongodb_8="${var_mongodb_8:-}"
-  [[ -n "$install_mongodb_8" ]] || read -r -p "${TAB3}Do you want to install MongoDB 8.0 instead of 7.0? [y/N]: " install_mongodb_8 || true
-  if [[ "$install_mongodb_8" =~ ^[Yy]([Ee][Ss])?$ ]]; then
+  read -p "${TAB3}Do you want to install MongoDB 8.0 instead of 7.0? [y/N]: " install_mongodb_8
+  if [[ "$install_mongodb_8" =~ ^[Yy]$ ]]; then
     MONGO_VERSION="8.0" setup_mongodb
   else
     MONGO_VERSION="7.0" setup_mongodb

install/mysql-install.sh

@@ -21,8 +21,7 @@ msg_ok "Installed Dependencies"
 
 RELEASE_REPO="mysql-8.0"
 RELEASE_AUTH="mysql_native_password"
-prompt="${var_mysql_lts:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install the MySQL 8.4 LTS release instead of MySQL 8.0 (bug fix track; EOL April-2026)? <y/N> " prompt || true
+read -r -p "${TAB3}Would you like to install the MySQL 8.4 LTS release instead of MySQL 8.0 (bug fix track; EOL April-2026)? <y/N> " prompt
 if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
   RELEASE_REPO="mysql-8.4-lts"
   RELEASE_AUTH="caching_sha2_password"
@@ -62,8 +61,7 @@ echo -e "MySQL user: root" >>~/mysql.creds
 echo -e "MySQL password: $ADMIN_PASS" >>~/mysql.creds
 msg_ok "MySQL Server configured"
 
-prompt="${var_mysql_phpmyadmin:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add PhpMyAdmin? <y/N> " prompt || true
+read -r -p "${TAB3}Would you like to add PhpMyAdmin? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/tools/addon/phpmyadmin.sh)"
 fi

install/netbird-install.sh

@@ -36,8 +36,7 @@ echo " 1) NetBird Managed (default) - Use NetBird's managed service"
 echo " 2) Self-Hosted - Use your own NetBird management server"
 echo ""
 
-DEPLOYMENT_TYPE="${var_netbird_deployment:-}"
-[[ -n "$DEPLOYMENT_TYPE" ]] || read -r -p "${TAB3}Select deployment type [1]: " DEPLOYMENT_TYPE || true
+read -r -p "${TAB3}Select deployment type [1]: " DEPLOYMENT_TYPE
 DEPLOYMENT_TYPE="${DEPLOYMENT_TYPE:-1}"
 
 NETBIRD_MGMT_URL=""
@@ -52,8 +51,7 @@ case "$DEPLOYMENT_TYPE" in
     echo "Enter your NetBird management server URL."
     echo "Example: https://management.example.com"
     echo ""
-    NETBIRD_MGMT_URL="${var_netbird_mgmt_url:-}"
-    [[ -n "$NETBIRD_MGMT_URL" ]] || read -r -p "Management URL: " NETBIRD_MGMT_URL || true
+    read -r -p "Management URL: " NETBIRD_MGMT_URL
 
     if [[ -z "$NETBIRD_MGMT_URL" ]]; then
       msg_warn "No management URL provided. Run 'netbird up --management-url <url>' to connect."
@@ -83,8 +81,7 @@ else
 fi
 echo ""
 
-AUTH_METHOD="${var_netbird_auth:-}"
-[[ -n "$AUTH_METHOD" ]] || read -r -p "Select authentication method [1]: " AUTH_METHOD || true
+read -r -p "Select authentication method [1]: " AUTH_METHOD
 AUTH_METHOD="${AUTH_METHOD:-1}"
 
 if [[ "$DEPLOYMENT_TYPE" == "1" ]]; then
@@ -93,8 +90,7 @@ if [[ "$DEPLOYMENT_TYPE" == "1" ]]; then
       echo ""
       echo "Enter your NetBird setup key from the NetBird dashboard."
       echo ""
-      NETBIRD_SETUP_KEY="${var_netbird_setup_key:-}"
-      [[ -n "$NETBIRD_SETUP_KEY" ]] || read -r -p "Setup key: " NETBIRD_SETUP_KEY || true
+      read -r -p "Setup key: " NETBIRD_SETUP_KEY
       echo ""
 
       if [[ -z "$NETBIRD_SETUP_KEY" ]]; then
@@ -140,8 +136,7 @@ else
       echo ""
       echo "Enter your NetBird setup key from the NetBird dashboard."
       echo ""
-      NETBIRD_SETUP_KEY="${var_netbird_setup_key:-}"
-      [[ -n "$NETBIRD_SETUP_KEY" ]] || read -r -p "Setup key: " NETBIRD_SETUP_KEY || true
+      read -r -p "Setup key: " NETBIRD_SETUP_KEY
       echo ""
 
       if [[ -z "$NETBIRD_SETUP_KEY" ]]; then

install/newt-install.sh

@@ -16,15 +16,16 @@ update_os
 fetch_and_deploy_gh_release "newt" "fosrl/newt" "singlefile" "latest" "/opt/newt" "newt_linux_$(arch_resolve)"
 ln -sf /opt/newt/newt /usr/local/bin/newt
 
-NEWT_ID="${NEWT_ID:-${var_newt_id:-}}"
-[[ -n "$NEWT_ID" ]] || read -rp "Newt ID (from your Pangolin dashboard): " NEWT_ID || true
-NEWT_SECRET="${NEWT_SECRET:-${var_newt_secret:-}}"
-if [[ -z "$NEWT_SECRET" ]]; then
-  read -rsp "Newt Secret: " NEWT_SECRET || true
+if [[ -z "${NEWT_ID:-}" ]]; then
+  read -rp "Newt ID (from your Pangolin dashboard): " NEWT_ID
+fi
+if [[ -z "${NEWT_SECRET:-}" ]]; then
+  read -rsp "Newt Secret: " NEWT_SECRET
   echo
 fi
-PANGOLIN_ENDPOINT="${PANGOLIN_ENDPOINT:-${var_newt_endpoint:-}}"
-[[ -n "$PANGOLIN_ENDPOINT" ]] || read -rp "Pangolin endpoint (e.g. https://pangolin.example.com): " PANGOLIN_ENDPOINT || true
+if [[ -z "${PANGOLIN_ENDPOINT:-}" ]]; then
+  read -rp "Pangolin endpoint (e.g. https://pangolin.example.com): " PANGOLIN_ENDPOINT
+fi
 
 if [[ -z "$NEWT_ID" || -z "$NEWT_SECRET" || -z "$PANGOLIN_ENDPOINT" ]]; then
   msg_error "Newt ID, Secret and Endpoint are all required. Aborting."

install/npmplus-install.sh

@@ -38,14 +38,12 @@ curl -fsSL "https://raw.githubusercontent.com/ZoeyVid/NPMplus/refs/heads/develop
 msg_ok "Fetched NPMplus"
 
 attempts=0
-TZ_INPUT="${var_npmplus_tz:-}"
 while true; do
-  [[ -n "$TZ_INPUT" ]] || read -r -p "${TAB3}Enter your TZ Identifier (e.g., Europe/Berlin): " TZ_INPUT || { msg_error "No TZ identifier given; set var_npmplus_tz or answer the prompt"; exit 64; }
+  read -r -p "${TAB3}Enter your TZ Identifier (e.g., Europe/Berlin): " TZ_INPUT
   if validate_tz "$TZ_INPUT"; then
     break
   fi
   msg_error "Invalid timezone! Please enter a valid TZ identifier."
-  TZ_INPUT=""
 
   attempts=$((attempts + 1))
   if [[ "$attempts" -ge 3 ]]; then
@@ -54,9 +52,7 @@ while true; do
   fi
 done
 
-ACME_EMAIL_INPUT="${var_npmplus_acme_email:-}"
-[[ -n "$ACME_EMAIL_INPUT" ]] || read -r -p "${TAB3}Enter your ACME Email: " ACME_EMAIL_INPUT || true
-[[ -n "$ACME_EMAIL_INPUT" ]] || { msg_error "No ACME e-mail given; set var_npmplus_acme_email or answer the prompt"; exit 64; }
+read -r -p "${TAB3}Enter your ACME Email: " ACME_EMAIL_INPUT
 
 yq -i "
   .services.npmplus.environment |=

install/opencloud-install.sh

@@ -17,23 +17,19 @@ MAX_ATTEMPTS=3
 servers=("opencloud" "collabora" "wopi")
 attempt=0
 for server in "${servers[@]}"; do
-  fqdn_var="var_opencloud_${server}_fqdn"
-  fqdn="${!fqdn_var:-}"
   until ((attempt >= MAX_ATTEMPTS)); do
     attempt=$((attempt + 1))
-    [[ -n "$fqdn" ]] || read -rp "${TAB3}Enter the FQDN of your ${server^} server (ATTEMPT $attempt/$MAX_ATTEMPTS) (eg $server.domain.tld): " fqdn || { msg_error "No ${server^} FQDN given; set ${fqdn_var} or answer the prompt"; exit 64; }
+    read -rp "${TAB3}Enter the FQDN of your ${server^} server (ATTEMPT $attempt/$MAX_ATTEMPTS) (eg $server.domain.tld): " fqdn
     if [[ -z "$fqdn" ]]; then
       msg_warn "Domain cannot be empty!"
     elif [[ "$fqdn" =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]]; then
       msg_warn "IP address not allowed! Please use a FQDN"
-      fqdn=""
     elif [[ "$fqdn" =~ ^[a-zA-Z0-9]([a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?(\.[a-zA-Z0-9]([a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?)*\.[a-zA-Z]{2,}$ ]]; then
       export ${server^^}_FQDN="$fqdn"
       attempt=0
       break
     else
       msg_warn "Invalid domain format!"
-      fqdn=""
     fi
   done
   if ((attempt >= MAX_ATTEMPTS)); then

install/openwebui-install.sh

@@ -27,7 +27,7 @@ PYTHON_VERSION="3.12" setup_uv
 
 OTEL_ARGS=()
 prompt="${var_openwebui_otel:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install OpenTelemetry instrumentation packages (requires manual .env configuration)? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to install OpenTelemetry instrumentation packages (requires manual .env configuration)? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   for pkg in \
     opentelemetry-api \
@@ -57,7 +57,7 @@ done
 msg_ok "Installed Open WebUI"
 
 prompt="${var_openwebui_ollama:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Ollama? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Ollama? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   if [[ "$(arch_resolve)" == "amd64" ]]; then
   msg_info "Setting up Intel® Repositories"

install/openziti-controller-install.sh

@@ -27,22 +27,17 @@ apt_update_safe
 $STD apt install -y openziti-controller openziti-console </dev/null
 msg_ok "Installed openziti"
 
-prompt="${var_openziti_controller_autoconfig:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to go through the auto configuration now? <y/N>" prompt || true
+read -r -p "${TAB3}Would you like to go through the auto configuration now? <y/N>" prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   GEN_FQDN="controller.${LOCAL_IP}.sslip.io"
-  ZITI_CTRL_ADVERTISED_ADDRESS="${var_openziti_controller_fqdn:-}"
-  [[ -n "$ZITI_CTRL_ADVERTISED_ADDRESS" ]] || read -r -p "${TAB3}Please enter the controller FQDN [${GEN_FQDN}]: " ZITI_CTRL_ADVERTISED_ADDRESS || true
+  read -r -p "${TAB3}Please enter the controller FQDN [${GEN_FQDN}]: " ZITI_CTRL_ADVERTISED_ADDRESS
   ZITI_CTRL_ADVERTISED_ADDRESS=${ZITI_CTRL_ADVERTISED_ADDRESS:-$GEN_FQDN}
-  ZITI_CTRL_ADVERTISED_PORT="${var_openziti_controller_port:-}"
-  [[ -n "$ZITI_CTRL_ADVERTISED_PORT" ]] || read -r -p "${TAB3}Please enter the controller port [1280]: " ZITI_CTRL_ADVERTISED_PORT || true
+  read -r -p "${TAB3}Please enter the controller port [1280]: " ZITI_CTRL_ADVERTISED_PORT
   ZITI_CTRL_ADVERTISED_PORT=${ZITI_CTRL_ADVERTISED_PORT:-1280}
-  ZITI_USER="${var_openziti_controller_user:-}"
-  [[ -n "$ZITI_USER" ]] || read -r -p "${TAB3}Please enter the controller admin user [admin]: " ZITI_USER || true
+  read -r -p "${TAB3}Please enter the controller admin user [admin]: " ZITI_USER
   ZITI_USER=${ZITI_USER:-admin}
   GEN_PWD=$(head -c128 /dev/urandom | LC_ALL=C tr -dc 'A-Za-z0-9!@#$%^*_+~' | cut -c 1-12)
-  ZITI_PWD="${var_openziti_controller_password:-}"
-  [[ -n "$ZITI_PWD" ]] || read -r -p "${TAB3}Please enter the controller admin password [${GEN_PWD}]:" ZITI_PWD || true
+  read -r -p "${TAB3}Please enter the controller admin password [${GEN_PWD}]:" ZITI_PWD
   ZITI_PWD=${ZITI_PWD:-$GEN_PWD}
   CONFIG_FILE="/opt/openziti/etc/controller/bootstrap.env"
   sed -i "s|^ZITI_CTRL_ADVERTISED_ADDRESS=.*|ZITI_CTRL_ADVERTISED_ADDRESS='${ZITI_CTRL_ADVERTISED_ADDRESS}'|" "$CONFIG_FILE"

install/openziti-tunnel-install.sh

@@ -29,8 +29,7 @@ sed -i '0,/^ExecStart/ { /^ExecStart/ { n; s|^ExecStart.*|ExecStart=/opt/openzit
 systemctl daemon-reload
 msg_ok "Installed openziti"
 
-prompt="${var_openziti_tunnel_enrollment_token:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Please paste an identity enrollment token(JTW)" prompt || true
+read -r -p "${TAB3}Please paste an identity enrollment token(JTW)" prompt
 if [[ ${prompt} ]]; then
   msg_info "Adding identity"
   echo "${prompt}" >/opt/openziti/etc/identities/identity.jwt

install/pangolin-install.sh

@@ -27,13 +27,15 @@ fetch_and_deploy_gh_release "gerbil" "fosrl/gerbil" "singlefile" "latest" "/usr/
 fetch_and_deploy_gh_release "traefik" "traefik/traefik" "prebuild" "latest" "/usr/bin" "traefik_v*_linux_$(arch_resolve).tar.gz"
 
 pango_url="${var_pangolin_url:-}"
-[[ -n "$pango_url" ]] || read -rp "${TAB3}Enter your Pangolin URL (ex: https://pangolin.example.com): " pango_url || true
-[[ -n "$pango_url" ]] || { msg_error "No Pangolin URL given; set var_pangolin_url or answer the prompt"; exit 64; }
+if [[ -z "$pango_url" ]]; then
+  read -rp "${TAB3}Enter your Pangolin URL (ex: https://pangolin.example.com): " pango_url
+fi
 [[ "$pango_url" != https://* && "$pango_url" != http://* ]] && pango_url="https://${pango_url}"
 
 pango_email="${var_pangolin_email:-}"
-[[ -n "$pango_email" ]] || read -rp "${TAB3}Enter your email address: " pango_email || true
-[[ -n "$pango_email" ]] || { msg_error "No email address given; set var_pangolin_email or answer the prompt"; exit 64; }
+if [[ -z "$pango_email" ]]; then
+  read -rp "${TAB3}Enter your email address: " pango_email
+fi
 
 msg_info "Setup Pangolin"
 SECRET_KEY=$(random_password 32)

install/paperless-gpt-install.sh

@@ -38,22 +38,16 @@ CGO_ENABLED=1 go build -tags musl -o paperless-gpt .
 msg_ok "Setup Paperless-GPT"
 
 mkdir -p /opt/paperless-gpt-data
-input_url="${var_paperless_gpt_enter_url:-}"
-[[ -n "$input_url" ]] || read -rp "${TAB3}Do you want to enter the Paperless local URL now? (y/n) " input_url || true
-if [[ $input_url =~ ^[Yy]([Ee][Ss])?$ ]]; then
-  PAPERLESS_BASE_URL="${var_paperless_gpt_url:-}"
-  [[ -n "$PAPERLESS_BASE_URL" ]] || read -rp "${TAB3}Enter your Paperless-NGX instance URL (e.g., http://192.168.1.100:8000): " PAPERLESS_BASE_URL || true
-  [[ -n "$PAPERLESS_BASE_URL" ]] || { msg_error "No Paperless-NGX URL given; set var_paperless_gpt_url or answer the prompt"; exit 64; }
+read -rp "${TAB3}Do you want to enter the Paperless local URL now? (y/n) " input_url
+if [[ $input_url =~ ^[Yy]$ ]]; then
+  read -rp "${TAB3}Enter your Paperless-NGX instance URL (e.g., http://192.168.1.100:8000): " PAPERLESS_BASE_URL
 else
   PAPERLESS_BASE_URL="http://your_paperless_ngx_url"
 fi
 
-input_token="${var_paperless_gpt_enter_token:-}"
-[[ -n "$input_token" ]] || read -rp "${TAB3}Do you want to enter the Paperless API token now? (y/n) " input_token || true
-if [[ $input_token =~ ^[Yy]([Ee][Ss])?$ ]]; then
-  PAPERLESS_API_TOKEN="${var_paperless_gpt_api_token:-}"
-  [[ -n "$PAPERLESS_API_TOKEN" ]] || read -rp "${TAB3}Enter your Paperless API token: " PAPERLESS_API_TOKEN || true
-  [[ -n "$PAPERLESS_API_TOKEN" ]] || { msg_error "No Paperless API token given; set var_paperless_gpt_api_token or answer the prompt"; exit 64; }
+read -rp "${TAB3}Do you want to enter the Paperless API token now? (y/n) " input_token
+if [[ $input_token =~ ^[Yy]$ ]]; then
+  read -rp "${TAB3}Enter your Paperless API token: " PAPERLESS_API_TOKEN
 else
   PAPERLESS_API_TOKEN="your_paperless_api_token"
 fi

install/paperless-ngx-install.sh

@@ -172,7 +172,7 @@ systemctl enable -q --now paperless-webserver paperless-scheduler paperless-task
 msg_ok "Created Services"
 
 prompt="${var_paperless_ngx_adminer:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Adminer? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Adminer? <y/N> " prompt
 if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
   setup_adminer
 fi

install/pihole-install.sh

@@ -57,10 +57,10 @@ systemctl restart pihole-FTL.service
 msg_ok "Installed Pi-hole"
 
 prompt="${var_pihole_unbound:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Unbound? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Unbound? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   prompt="${var_pihole_unbound_dot:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Unbound is configured as a recursive DNS server by default, would you like it to be configured as a forwarding DNS server (using DNS-over-TLS (DoT)) instead? <y/N> " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Unbound is configured as a recursive DNS server by default, would you like it to be configured as a forwarding DNS server (using DNS-over-TLS (DoT)) instead? <y/N> " prompt
   msg_info "Installing Unbound"
   mkdir -p /etc/unbound/unbound.conf.d
   cat <<EOF >/etc/unbound/unbound.conf.d/pi-hole.conf

install/pocketid-install.sh

@@ -13,9 +13,7 @@ setting_up_container
 network_check
 update_os
 
-public_url="${var_pocketid_url:-}"
-[[ -n "$public_url" ]] || read -r -p "${TAB3}What public URL do you want to use (e.g. pocketid.mydomain.com)? " public_url || true
-[[ -n "$public_url" ]] || { msg_error "No public URL given; set var_pocketid_url or answer the prompt"; exit 64; }
+read -r -p "${TAB3}What public URL do you want to use (e.g. pocketid.mydomain.com)? " public_url
 fetch_and_deploy_gh_release "pocket-id" "pocket-id/pocket-id" "singlefile" "latest" "/opt/pocket-id/" "pocket-id_linux_$(arch_resolve)"
 
 msg_info "Configuring Pocket ID"

install/podman-homeassistant-install.sh

@@ -54,7 +54,7 @@ msg_ok "Installed Podman"
 mkdir -p /etc/containers/systemd
 
 prompt="${var_podman_homeassistant_portainer:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Portainer? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Portainer? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   msg_info "Installing Portainer $PORTAINER_LATEST_VERSION"
   podman volume create portainer_data >/dev/null
@@ -82,7 +82,7 @@ EOF
   msg_ok "Installed Portainer $PORTAINER_LATEST_VERSION"
 else
   prompt="${var_podman_homeassistant_portainer_agent:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add the Portainer Agent? <y/N> " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add the Portainer Agent? <y/N> " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
     msg_info "Installing Portainer agent $PORTAINER_AGENT_LATEST_VERSION"
     cat <<EOF >/etc/containers/systemd/portainer-agent.container

install/podman-install.sh

@@ -49,7 +49,7 @@ msg_ok "Installed Podman"
 mkdir -p /etc/containers/systemd
 
 prompt="${var_podman_portainer:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Portainer? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add Portainer? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   msg_info "Installing Portainer $PORTAINER_LATEST_VERSION"
   podman volume create portainer_data >/dev/null
@@ -78,7 +78,7 @@ EOF
   msg_ok "Installed Portainer $PORTAINER_LATEST_VERSION"
 else
   prompt="${var_podman_portainer_agent:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add the Portainer Agent? <y/N> " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add the Portainer Agent? <y/N> " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
     msg_info "Installing Portainer agent $PORTAINER_AGENT_LATEST_VERSION"
     $STD podman pull docker.io/portainer/agent:latest

install/pterodactyl-panel-install.sh

@@ -47,15 +47,9 @@ msg_ok "Installed PHP"
 
 MARIADB_DB_NAME="panel" MARIADB_DB_USER="pterodactyl" MARIADB_DB_CREDS_FILE="$HOME/pterodactyl-panel.creds" setup_mariadb_db
 
-ADMIN_EMAIL="${var_pterodactyl_panel_admin_email:-}"
-[[ -n "$ADMIN_EMAIL" ]] || read -r -p "${TAB3}Provide an email address for admin login, this should be a valid email address: " ADMIN_EMAIL || true
-[[ -n "$ADMIN_EMAIL" ]] || { msg_error "No admin email given; set var_pterodactyl_panel_admin_email or answer the prompt"; exit 64; }
-NAME_FIRST="${var_pterodactyl_panel_first_name:-}"
-[[ -n "$NAME_FIRST" ]] || read -r -p "${TAB3}Enter your First Name: " NAME_FIRST || true
-[[ -n "$NAME_FIRST" ]] || { msg_error "No first name given; set var_pterodactyl_panel_first_name or answer the prompt"; exit 64; }
-NAME_LAST="${var_pterodactyl_panel_last_name:-}"
-[[ -n "$NAME_LAST" ]] || read -r -p "${TAB3}Enter your Last Name: " NAME_LAST || true
-[[ -n "$NAME_LAST" ]] || { msg_error "No last name given; set var_pterodactyl_panel_last_name or answer the prompt"; exit 64; }
+read -p "${TAB3}Provide an email address for admin login, this should be a valid email address: " ADMIN_EMAIL
+read -p "${TAB3}Enter your First Name: " NAME_FIRST
+read -p "${TAB3}Enter your Last Name: " NAME_LAST
 
 fetch_and_deploy_gh_release "pterodactyl-panel" "pterodactyl/panel" "prebuild" "latest" "/opt/pterodactyl-panel" "panel.tar.gz"
 

install/rustdeskserver-install.sh

@@ -13,8 +13,11 @@ setting_up_container
 network_check
 update_os
 
-prompt="${var_rustdesk_api:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add the RustDesk API web UI (lejianwen/rustdesk-api, unmaintained since 09/2025)? <y/N> " prompt || true
+if [[ -n "${var_rustdesk_api:-}" ]]; then
+  prompt="$var_rustdesk_api"
+else
+  read -r -p "${TAB3}Would you like to add the RustDesk API web UI (lejianwen/rustdesk-api, unmaintained since 09/2025)? <y/N> " prompt
+fi
 INSTALL_API=0
 [[ "${prompt,,}" =~ ^(y|yes|true)$ ]] && INSTALL_API=1
 API_PASS="$(random_password 16)"

install/sabnzbd-install.sh

@@ -41,7 +41,7 @@ $STD uv pip install -r /opt/sabnzbd/requirements.txt --python=/opt/sabnzbd/venv/
 msg_ok "Installed SABnzbd"
 
 prompt="${var_sabnzbd_par2_turbo:-}"
-[[ -n "$prompt" ]] || read -r -p "Would you like to install par2cmdline-turbo? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "Would you like to install par2cmdline-turbo? <y/N> " prompt
 if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
   mv /usr/bin/par2 /usr/bin/par2.old
   fetch_and_deploy_gh_release "par2cmdline-turbo" "animetosho/par2cmdline-turbo" "prebuild" "latest" "/usr/bin/" "*-linux-$(arch_resolve).zip"

install/shelfmark-install.sh

@@ -47,8 +47,7 @@ echo " 3) Use an existing Flaresolverr/Byparr LXC"
 echo " 4) Disable captcha bypassing altogether (not recommended)"
 echo ""
 
-DEPLOYMENT_TYPE="${var_shelfmark_deployment_type:-}"
-[[ -n "$DEPLOYMENT_TYPE" ]] || read -r -p "${TAB3}Select deployment type [1]: " DEPLOYMENT_TYPE || true
+read -r -p "${TAB3}Select deployment type [1]: " DEPLOYMENT_TYPE
 DEPLOYMENT_TYPE="${DEPLOYMENT_TYPE:-1}"
 if [[ "$(arch_resolve)" == "arm64" && "$DEPLOYMENT_TYPE" == "2" ]]; then
   msg_warn "FlareSolverr has no arm64 build; using Shelfmark's internal bypasser instead"
@@ -70,8 +69,7 @@ case "$DEPLOYMENT_TYPE" in
   echo "Example: http://flaresoverr.homelab.lan:8191 or"
   echo "http://192.168.10.99:8191"
   echo ""
-  BYPASSER_URL="${var_shelfmark_bypasser_url:-}"
-  [[ -n "$BYPASSER_URL" ]] || read -r -p "FlareSolverr/Byparr URL: " BYPASSER_URL || true
+  read -r -p "FlareSolverr/Byparr URL: " BYPASSER_URL
 
   if [[ -z "$BYPASSER_URL" ]]; then
     msg_warn "No Flaresolverr/Byparr URL provided. Falling back to Shelfmark's internal bypasser."

install/silverbullet-install.sh

@@ -18,7 +18,7 @@ mkdir -p /opt/silverbullet/space
 
 RUNTIME_API_ENV=""
 runtime_api_prompt="${var_silverbullet_runtime_api:-}"
-[[ -n "$runtime_api_prompt" ]] || read -rp "${TAB3}Enable Silverbullet Runtime API? Requires Chromium (~700MB). Uses ~200MB extra RAM. (y/N): " runtime_api_prompt || true
+[[ -n "$runtime_api_prompt" ]] || read -rp "${TAB3}Enable Silverbullet Runtime API? Requires Chromium (~700MB). Uses ~200MB extra RAM. (y/N): " runtime_api_prompt
 if [[ "${runtime_api_prompt,,}" =~ ^(y|yes)$ ]]; then
   msg_info "Installing Chromium for Runtime API"
   $STD apt install -y chromium

install/slskd-install.sh

@@ -37,7 +37,7 @@ sed -i \
 msg_ok "Configured Slskd"
 
 soularr="${var_slskd_soularr:-}"
-[[ -n "$soularr" ]] || read -rp "${TAB3}Do you want to install Soularr? y/N " soularr || true
+[[ -n "$soularr" ]] || read -rp "${TAB3}Do you want to install Soularr? y/N " soularr
 if [[ ${soularr,,} =~ ^(y|yes)$ ]]; then
   PYTHON_VERSION="3.11" setup_uv
   fetch_and_deploy_gh_release "Soularr" "mrusse/soularr" "tarball" "latest" "/opt/soularr"

install/sqlserver2022-install.sh

@@ -46,8 +46,7 @@ echo 'export PATH="$PATH:/opt/mssql-tools18/bin"' >>~/.bash_profile
 source ~/.bash_profile
 msg_ok "Installed SQL Server Tools"
 
-prompt="${var_sqlserver2022_setup_now:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Do you want to run the SQL server setup now? (Later is also possible) <y/N>" prompt || true
+read -r -p "${TAB3}Do you want to run the SQL server setup now? (Later is also possible) <y/N>" prompt
 if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
   /opt/mssql/bin/mssql-conf setup
 else

install/sqlserver2025-install.sh

@@ -46,8 +46,7 @@ echo 'export PATH="$PATH:/opt/mssql-tools18/bin"' >>~/.bash_profile
 source ~/.bash_profile
 msg_ok "Installed SQL Server Tools"
 
-prompt="${var_sqlserver2025_setup_now:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Do you want to run the SQL Server setup now? (Later is also possible) <y/N>" prompt || true
+read -r -p "${TAB3}Do you want to run the SQL Server setup now? (Later is also possible) <y/N>" prompt
 if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
   /opt/mssql/bin/mssql-conf setup
 else

install/tinyauth-install.sh

@@ -32,9 +32,7 @@ Password: ${PASS}
 EOF
   msg_ok "Set up Tinyauth"
 
-  app_url="${var_tinyauth_app_url:-}"
-  [[ -n "$app_url" ]] || read -r -p "${TAB3}Enter your Tinyauth subdomain (e.g. https://tinyauth.example.com): " app_url || true
-  [[ -n "$app_url" ]] || { msg_error "No Tinyauth app URL given; set var_tinyauth_app_url or answer the prompt"; exit 64; }
+  read -r -p "${TAB3}Enter your Tinyauth subdomain (e.g. https://tinyauth.example.com): " app_url
 
   msg_info "Creating Service"
   cat <<EOF >/opt/tinyauth/.env
@@ -79,9 +77,7 @@ Password: ${PASS}
 EOF
   msg_ok "Configured Tinyauth"
 
-  app_url="${var_tinyauth_app_url:-}"
-  [[ -n "$app_url" ]] || read -r -p "${TAB3}Enter your Tinyauth subdomain (e.g. https://tinyauth.example.com): " app_url || true
-  [[ -n "$app_url" ]] || { msg_error "No Tinyauth app URL given; set var_tinyauth_app_url or answer the prompt"; exit 64; }
+  read -r -p "${TAB3}Enter your Tinyauth subdomain (e.g. https://tinyauth.example.com): " app_url
 
   cat <<EOF >/opt/tinyauth/.env
 TINYAUTH_DATABASE_PATH=/opt/tinyauth/database.db

install/traefik-install.sh

@@ -106,7 +106,7 @@ setup_alpine() {
   msg_ok "Installed Traefik"
 
   enable_webui="${var_traefik_webui:-}"
-  [[ -n "$enable_webui" ]] || read -r -p "${TAB3}Enable Traefik WebUI (Port 8080)? [y/N]: " enable_webui || true
+  [[ -n "$enable_webui" ]] || read -p "${TAB3}Enable Traefik WebUI (Port 8080)? [y/N]: " enable_webui
   if [[ "${enable_webui,,}" =~ ^(y|yes)$ ]]; then
     msg_info "Configuring Traefik WebUI"
     sed -i 's/localhost//g' /etc/traefik/traefik.yaml

install/twingate-connector-install.sh

@@ -14,17 +14,17 @@ network_check
 update_os
 
 install -d -m 0700 /etc/twingate
-access_token="${var_twingate_connector_access_token:-}"
-refresh_token="${var_twingate_connector_refresh_token:-}"
-network="${var_twingate_connector_network:-}"
+access_token=""
+refresh_token=""
+network=""
 while [[ -z "$access_token" ]]; do
-  read -rp "${TAB3}Please enter your access token: " access_token || { msg_error "No access token given; set var_twingate_connector_access_token or answer the prompt"; exit 64; }
+  read -rp "${TAB3}Please enter your access token: " access_token
 done
 while [[ -z "$refresh_token" ]]; do
-  read -rp "${TAB3}Please enter your refresh token: " refresh_token || { msg_error "No refresh token given; set var_twingate_connector_refresh_token or answer the prompt"; exit 64; }
+  read -rp "${TAB3}Please enter your refresh token: " refresh_token
 done
 while [[ -z "$network" ]]; do
-  read -rp "${TAB3}Please enter your network name: " network || { msg_error "No network name given; set var_twingate_connector_network or answer the prompt"; exit 64; }
+  read -rp "${TAB3}Please enter your network name: " network
 done
 
 msg_info "Setup Twingate Repository"

install/valkey-install.sh

@@ -37,10 +37,10 @@ setup_deb_based() {
 
   echo
   prompt="${var_valkey_tls:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Enable TLS for Valkey (Sentinel mode does not supported)? [y/N]: " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Enable TLS for Valkey (Sentinel mode does not supported)? [y/N]: " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
       tls_only="${var_valkey_tls_only:-}"
-      [[ -n "$tls_only" ]] || read -r -p "${TAB3}Use TLS-only mode (disable TCP port 6379)? [y/N]: " tls_only || true
+      [[ -n "$tls_only" ]] || read -r -p "${TAB3}Use TLS-only mode (disable TCP port 6379)? [y/N]: " tls_only
       msg_info "Configuring TLS for Valkey..."
 
       create_self_signed_cert "Valkey"

install/versitygw-install.sh

@@ -17,7 +17,7 @@ fetch_and_deploy_gh_release "versitygw" "versity/versitygw" "binary"
 
 WEBUI_CONF=""
 webui_prompt="${var_versitygw_webgui:-}"
-[[ -n "$webui_prompt" ]] || read -rp "Would you like to enable the VersityGW WebGUI (Beta)? (y/N): " webui_prompt || true
+[[ -n "$webui_prompt" ]] || read -rp "Would you like to enable the VersityGW WebGUI (Beta)? (y/N): " webui_prompt
 if [[ "${webui_prompt,,}" =~ ^(y|yes)$ ]]; then
   WEBUI_CONF="\nVGW_WEBUI_PORT=:7071\nVGW_WEBUI_NO_TLS=true"
   msg_ok "WebGUI will be enabled on port 7071"

install/victoriametrics-install.sh

@@ -28,7 +28,7 @@ fetch_and_deploy_gh_release "victoriametrics" "VictoriaMetrics/VictoriaMetrics"
 fetch_and_deploy_gh_release "vmutils" "VictoriaMetrics/VictoriaMetrics" "prebuild" "$victoriametrics_release" "/opt/victoriametrics" "$vmutils_filename"
 
 prompt="${var_victoriametrics_logs:-}"
-[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add VictoriaLogs? <y/N> " prompt || true
+[[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add VictoriaLogs? <y/N> " prompt
 
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   vl_release_json="$(mktemp)"

install/wireguard-install.sh

@@ -25,7 +25,7 @@ setup_deb_based() {
   msg_ok "Installed WireGuard"
 
   prompt="${var_wireguard_wgdashboard:-}"
-  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add WGDashboard? <y/N> " prompt || true
+  [[ -n "$prompt" ]] || read -r -p "${TAB3}Would you like to add WGDashboard? <y/N> " prompt
   if [[ "${prompt,,}" =~ ^(y|yes)$ ]]; then
     git clone -q https://github.com/WGDashboard/WGDashboard.git /etc/wgdashboard
 
@@ -111,7 +111,7 @@ EOF
   msg_ok "Installed WireGuard"
 
   INSTALL_WGD="${var_wireguard_wgdashboard:-}"
-  [[ -n "$INSTALL_WGD" ]] || read -rp "${TAB3}Do you want to install WGDashboard? (y/N): " INSTALL_WGD || true
+  [[ -n "$INSTALL_WGD" ]] || read -rp "${TAB3}Do you want to install WGDashboard? (y/N): " INSTALL_WGD
   if [[ "${INSTALL_WGD,,}" =~ ^(y|yes)$ ]]; then
     msg_info "Installing additional dependencies for WGDashboard"
     $STD apk add --no-cache \

install/zabbix-install.sh

@@ -16,8 +16,7 @@ update_os
 PG_VERSION="17" setup_postgresql
 PG_DB_NAME="zabbixdb" PG_DB_USER="zabbix" setup_postgresql_db
 
-ZABBIX_CHOICE="${var_zabbix_version:-}"
-[[ -n "$ZABBIX_CHOICE" ]] || read -rp "Choose Zabbix version [1] 7.0 LTS  [2] 7.4 (Latest Stable)  [3] Latest available (default: 2): " ZABBIX_CHOICE || true
+read -rp "Choose Zabbix version [1] 7.0 LTS  [2] 7.4 (Latest Stable)  [3] Latest available (default: 2): " ZABBIX_CHOICE
 ZABBIX_CHOICE=${ZABBIX_CHOICE:-2}
 case "$ZABBIX_CHOICE" in
 1) ZABBIX_VERSION="7.0" ;;
@@ -60,9 +59,8 @@ sed -i "s/^DBUser=.*/DBUser=$PG_DB_USER/" /etc/zabbix/zabbix_server.conf
 sed -i "s/^# DBPassword=.*/DBPassword=$PG_DB_PASS/" /etc/zabbix/zabbix_server.conf
 msg_ok "Installed Zabbix $ZABBIX_VERSION"
 
-AGENT_CHOICE="${var_zabbix_agent:-}"
 while true; do
-  [[ -n "$AGENT_CHOICE" ]] || read -rp "Which agent do you want to install? [1=agent (classic), 2=agent2 (modern), default=1]: " AGENT_CHOICE || AGENT_CHOICE="1"
+  read -rp "Which agent do you want to install? [1=agent (classic), 2=agent2 (modern), default=1]: " AGENT_CHOICE
   case "$AGENT_CHOICE" in
   2)
     AGENT_PKG="zabbix-agent2"
@@ -74,7 +72,6 @@ while true; do
     ;;
   *)
     echo "Invalid choice. Please enter 1 or 2."
-    AGENT_CHOICE=""
     ;;
   esac
 done
@@ -84,8 +81,7 @@ if [ "$AGENT_PKG" = "zabbix-agent2" ]; then
   echo "Choose plugins for Zabbix Agent2:"
   echo "1) PostgreSQL only (default, recommended)"
   echo "2) All plugins (may cause issues)"
-  PLUGIN_CHOICE="${var_zabbix_plugins:-}"
-  [[ -n "$PLUGIN_CHOICE" ]] || read -rp "Choose option [1-2]: " PLUGIN_CHOICE || true
+  read -rp "Choose option [1-2]: " PLUGIN_CHOICE
 
   case "$PLUGIN_CHOICE" in
   2)